Drip Dry is a spray-on, rinse-off hydrophobic coating designed to make drying your car, boat, or 4WD faster, streak-free, and hassle-free. Used with The Captain’s Musket or Big Loads Foam Cannon, it applies as a foamy layer, creating a slick, water-repellent surface that helps water bead up and roll off instantly. But that’s not all—Drip Dry also makes future washes easier by reducing dirt and road grime buildup, meaning less scrubbing and a cleaner ride for longer.

Why You Need It:

✅ Speeds up drying time – Water beads and sheets off instantly, reducing towel drying effort.
✅ Reduces water spots and streaks – Leaves behind a clean, spot-free finish.
✅ Creates a protective barrier – Helps prevent dirt, dust, and grime from sticking to the surface.
✅ Foam gun compatible – Easily applies using The Captain’s Musket or Big Loads Foam Cannon.
✅ Safe for all exterior surfaces – Works on paint, glass, plastics, and trim.

How to Use:

1️⃣ After washing, load Drip Dry into The Captain’s Musket (garden hose foam gun) or Big Loads Foam Cannon (pressure washer foam gun).
2️⃣ Spray a thin, even layer over the wet vehicle, working in sections.
3️⃣ Immediately rinse off with clean water, watching as water beads and rolls away.
4️⃣ Dry with a microfiber towel for a perfect, streak-free finish.

By creating a slick, hydrophobic surface, Drip Dry not only makes drying easier but also helps keep your vehicle cleaner for longer, so dirt and grime won’t stick as easily next time.

Preparation:

• Wash your vehicle thoroughly to remove dirt, grime, and debris.
• Rinse the vehicle well to ensure no soap residue is left behind.

Application:

• While the vehicle is still wet, spray Drip Dry - Hydro Coat evenly across all exterior surfaces.
• Focus on one section at a time, ensuring full coverage.

Rinse Off:

• Immediately rinse off the product with a strong stream of water, starting from the top of the vehicle and working your way down.
• Watch as the water beads up and rolls off the surface, leaving a streak-free finish.

1. Drying:

• For best results, dry your vehicle with a clean microfiber towel or chamois to remove any remaining water droplets and enhance the shine.

Preparation:

• Wash your vehicle thoroughly to remove dirt, grime, and debris.
• Rinse the vehicle well to ensure no soap residue is left behind.

Application:

• While the vehicle is still wet, spray Drip Dry - Hydro Coat evenly across all exterior surfaces.
• Focus on one section at a time, ensuring full coverage.

Rinse Off:

• Immediately rinse off the product with a strong stream of water, starting from the top of the vehicle and working your way down.
• Watch as the water beads up and rolls off the surface, leaving a streak-free finish.

1. Drying:

• For best results, dry your vehicle with a clean microfiber towel or chamois to remove any remaining water droplets and enhance the shine.

1. Is Drip Dry - Hydro Coat safe for all paint types?
   Yes, it’s safe for all paint types, including clear coats, and won’t harm wax or ceramic coatings.
2. Do I need to buff or wipe the product after application?
   No, just spray it on and rinse it off—no buffing or wiping required.
3. How often should I use Drip Dry - Hydro Coat?
   Use it after every wash for continuous protection and shine, or as needed to refresh the hydrophobic effect.
4. Does it provide UV protection?
   Yes, Drip Dry - Hydro Coat provides UV protection, helping to prevent paint fading and damage from sun exposure.

Can I use this on glass, plastic, and metal surfaces?Absolutely! It’s safe for use on all exterior surfaces, including glass, plastic, and metal.