Safety First:
- Wear Protective Gear: Always wear nitrile gloves to prevent skin contact and a P3 safety mask to avoid inhaling vapours.
- Ensure Good Ventilation: Work in a well-ventilated area to minimise inhalation risks.
- Work in Suitable Conditions: Avoid direct sunlight and ensure you are in a well-ventilated space. Be mindful of the direction of the wind to prevent overspray.
Mixing Instructions:
- Prepare the Solution: For the concentrated "Instant Aluminium Brightener," mix the product with water at a 7:1 ratio. For every 7 parts water, add 1 part of the concentrated brightener. In simple terms: Take a 1L spray bottle with a chemical-proof trigger and fill it up about 3/4 with water and the rest with Aluminium Cleaner Concentrate.
- Container: Use a clean, empty container to mix the solution. Ensure it’s large enough to hold the total volume of the mixed solution.
- Mix Thoroughly: Stir the solution well to ensure the brightener is fully dissolved and evenly distributed throughout the water.
Application Process:
- Preparation: Ensure the aluminium surface is dry and free from debris. Gear up with your safety equipment.
- Application: Apply the diluted Instant Aluminium Brightener evenly across the surface, using a spray bottle or a sponge for distribution.
- Spread Evenly: With a clean, soft brush, gently spread the solution, covering the entire area to be treated. This will ensure you don't get any drip marks.
- Wait Time: You wont need to wait long for this solution to work its magic. you should see results in seconds. Dont let the Aluminium Cleaner sit for very long.
- Neutralisation and Rinse: Mix a neutralisation solution into a bucket or a foam gun. You want to neutralise the surface with a high-alkaline solution to prevent overworking it. Rinse thoroughly with water to remove any residue, revealing a bright and rejuvenated aluminium finish.
