Tutorial

WHAT'S IN THE BOX?

HOW TO USE THE MUSKET

 

HOW TO WASH YOUR VESSLE WITH THE MUSKET

STEP. 1

Fill the 90ml canister with 20-40ml of Salty Captain Salt Wash concentrate and screw canister to the base of the Musket.

STEP. 2

Make sure the top adjustable handle is set to 'OFF' before turning your hose on at the tap. Once hose is on you are free to point the foam gun and and adjust the top handle all the way forward for 'FOAM' to soak your vessel. Ensure to thoroughly soak the vessel from top to bottom (twice over for optimal results) then pull the top hand back to the 'OFF' position.

STEP. 3

Allow the Salt Wash detergent to work its magic. Let the soap sit for 30sec to 1min or longer. Don't allow the formula to dry out on surfaces as this will cause soap streaking and residue to occur.

During this step, you may agitate with a sponge or brush suitable for your surface ti remove stubborn grit or grime.

STEP. 4

Rinse the soap residue off by adjusting the top handle to the middle setting "RINSE" which will allow water only to flow through the musket. Ensure you thoroughly remove all of the soap residue from the vessel to give your pride and joy to respect it deserves leaving no soapy streaks to be seen.

STEP. 5

Dry all the remaining water droplets with a microfibre towel to finish the job with a bitta pride!

 

HOW TO FLUSH YOUR VESSLE WITH THE MUSKET

STEP. 1

Fill the 90ml canister with 50-90ml of Salty Captain ENGINE FLUSH concentrate and screw canister to the base of the Musket.

STEP. 2

Make sure the top adjustable handle is set to 'OFF' before turning your hose on at the tap. Once hose is on, remove the adjustable spray nozzle from the female quick hose connector and insert onto you designated flush point.

STEP. 3

Depending on your vessel type (Click video link above for specific vessel instructions) Adjust the top handle to 'FLUSH' and allow the vessels engine to process the flush formula.