Aluminium Restoration Kit

Got oxidised, dull aluminium? Whether it's your boat, trailer, or 4WD accessories, our Aluminium Restoration Kit is the ultimate solution to remove oxidation and bring back that clean, polished look. Designed for ease of use, this kit includes everything you need to restore and protect your aluminium surfaces.

What’s Inside?

✅ 1L Aluminium Cleaner – Powerful formula that cuts through oxidation, stains, and grime to restore aluminium surfaces.
✅ 1L 4WD & RV Wash (Neutraliser) – Essential for balancing the pH after cleaning, ensuring no residue is left behind.
✅ Soft Bristle Brush – Designed to gently scrub without scratching, making the cleaning process effortless.

How to Use:

1️⃣ Apply the Aluminium Cleaner – Spray or brush it onto the surface and let it work its magic.
2️⃣ Agitate with the Soft Bristle Brush – Loosen up oxidation and stains without damaging the surface.
3️⃣ Rinse Off Thoroughly – Remove all residue with water.
4️⃣ Neutralise with 4WD & RV Wash – Balance the pH to ensure a streak-free, long-lasting finish.

Why You Need It:

✔️ Restores aluminium to its original shine
✔️ Removes tough oxidation, stains, and grime
✔️ Simple and effective – no fancy tools needed

Preparation:

• Ensure the aluminium surface is free from loose dirt or debris before starting.

Application of Aluminum Cleaner:

• Shake the 1L Aluminum Cleaner well before use.
• Apply the cleaner directly to the surface or onto the soft bristle brush.
• Gently scrub the surface with the brush, focusing on areas with heavy oxidation or grime.

Rinse:

• Rinse the surface thoroughly with clean water to remove the cleaner and dissolved contaminants.

Neutralising:

• After rinsing, apply the neutralising formula (pH12 - 4WD Wash) to the cleaned surface to restore the pH balance.
• Allow it to sit for a few minutes to neutralise any residual acidity.

1. Final Rinse:

• Rinse the surface with clean water to remove any remaining product, leaving your aluminium surface clean and vibrant.

Preparation:

• Ensure the aluminium surface is free from loose dirt or debris before starting.

Application of Aluminum Cleaner:

• Shake the 1L Aluminum Cleaner well before use.
• Apply the cleaner directly to the surface or onto the soft bristle brush.
• Gently scrub the surface with the brush, focusing on areas with heavy oxidation or grime.

Rinse:

• Rinse the surface thoroughly with clean water to remove the cleaner and dissolved contaminants.

Neutralising:

• After rinsing, apply the neutralising formula (pH12 - 4WD Wash) to the cleaned surface to restore the pH balance.
• Allow it to sit for a few minutes to neutralise any residual acidity.

1. Final Rinse:

• Rinse the surface with clean water to remove any remaining product, leaving your aluminium surface clean and vibrant.

1. Can this kit be used on all types of aluminium surfaces?
   Yes, the Ali Cleaner Kit is designed for bare aluminium surfaces. However, to prevent potential discolouration, avoid using the cleaner on magnesium alloys.
2. Why is the neutralising formula necessary?
   The neutralising formula restores the pH balance after cleansing, neutralising any residual acidity and helping protect the surface from further damage.
3. Will the soft bristle brush scratch my aluminium surface?
   No, the soft bristle brush is specifically chosen for its gentle yet effective cleaning capabilities, ensuring it won't scratch or damage the aluminium.
4. How often should I use the Ali Cleaner Kit?
   Use the kit as needed to maintain the cleanliness and appearance of your aluminium surfaces, especially when you notice oxidation or heavy grime buildup.

Is this kit safe for use on painted or coated aluminium?The Aluminum Cleaner is formulated for bare aluminium surfaces. Test a small area first or consult the product instructions for painted or coated aluminium.